Product introduction:
QYB-0.45/70 pneumatic oil pump adopts a combination of cycloid pump and plunger pump to supply oil to provide high-pressure oil power to the jack.
Technical features:
Easy to operate
It is easy to operate, can be started and braked instantaneously, can be started with load, and can maintain a stable state after starting. The reversing valve handle can easily control the direction of the oil circuit.
Small and light
The air motor directly drives the cycloid rotor pump and the plunger pump on the same shaft to work, and the high-pressure oil enters the actuator through the manual reversing valve.
High working efficiency
The large displacement cycloid pump and plunger pump simultaneously supply oil to the implement.
Easy to transport and install
It is small in size and has a solid wheel set, which can easily reach the designated position for work in the complex environment of the mine.The pump can be separated from the machine and installed directly on platforms such as drilling rigs, reducing safety hazards.
Parameters:
Item |
QYB-0.45/70 |
||
Air pressure(MPa) |
0.4-0.7 |
||
Air consumption(cm³/s) |
Compressed air 0.7Mpa 18880 |
||
Relief valve adjustment range(MPa) |
5.6MPa-70MPa |
||
Flow(L/min) |
13.7 |
1.7 |
0.45 |
Pressure(MPa) |
0.35 |
7 |
70 |
Total weight(Kg) |
36.25 |
||
Noise(dB(A)) |
Air pressure 0.7MPa,80-90 |
Product introduction:
It is suitable for prestressed anchoring projects in mines, tunnels, bridges, etc., with large tensile force, good sealing performance, long service life, simple operation and convenient maintenance.
Technical features:
Withstand pressure
Using special high-quality steel, it can withstand pressure and with large tensile force.
Strong grip
The claw type is reasonable, the anchor cable is firmly grasped, and the service life is long.
Easy to maintain
Instant start and braking, infinitely variable speed, start with load.
Parameters:
Item |
YDC-120/150 |
YDC-180/150 |
YDC-250/150 |
YDC-250/150A |
YDC-350/63 |
Maximum jacking force(kN) |
150 |
220 |
300 |
300 |
400 |
Rated tensile force(kN) |
120 |
180 |
250 |
250 |
350 |
Stroke(mm) |
150 |
150 |
150 |
150 |
125 |
Max.oil pressure(MPa) |
50 |
52 |
60 |
70 |
63 |
Piercing diameter(mm) |
Φ16 |
Φ16 |
Φ16 |
Φ18 |
Φ22 |
Anchor cable diameter(mm) |
Φ15.24 |
Φ15.24 |
Φ15.24 |
Φ17.8 |
Φ21.8 |
Hydraulic cable cutter i:s used to cut steel bars, steel strands, etc.The product is equipped with an anti-anchor cable spark splash protection device when the anchor cable is cut off, and the operation is safer.
Technical features:
Safe and reliable
Anti-anchor cable spark splash protection device is installed.
Simple structure
Simple structure and convenient operation.
Easy to maintain
Lightweight and easy to maintain.
Parameter:
Item |
JY-400/63/22 |
Rated pressure(kN) |
63 |
Rated cut force(kN) |
400 |
Cut stroke(mm) |
30 |
Blade hole diameter(mm) |
30 |
Anchor cable diameter(mm) |
≤Φ22 |
Cylinder diameter(mm) |
Φ90 |